Installing The 3U Rm Storage Enclosure Into A Compaq Rack; Introduction; Rack Mounting Kit - Compaq 3U RM Storage Enclosure Reference Manual

Installing the 3U RM Storage Enclosure

Introduction

This chapter discusses the following topics:
I

Rack Mounting Kit

I
Installing the storage enclosure
Rack Mounting Kit
The Rack Mounting Kit that ships with the Compaq 3U RM Storage Enclosure
contains:
I
A template to mark the rack for proper alignment of rack-mounting
brackets.
I
A cable management system consisting of a cable reel and cable rack
bracket.
NOTE: You will need a Phillips screwdriver #2 to install the cable management system.
Also, you will need two M6 x 1.0-12L Phillips screws that came with your rack.
I
A pair of spring-loaded rails.
NOTE: If you are using an Alpha "round hole" rack, you will need to obtain the 3U Rail
Extender Kit listed in Table 1-1, 3U RM Storage Enclosure Options.
into a Compaq Rack
3
Chapter