Power Distribution
6–14 UltraSCSI RAID Enclosure
Table 6–3
Removing a Power Supply (Continued)
4.
If there are no expansion enclosures, go to step 5.
If there are expansion enclosures, press and hold the PVA standby
power switch (C
ALLOUT
master EMU initiates a power shut down on all enclosures.
5.
Press and hold the PVA standby power switch (C
master enclosure until the master EMU initiates a power shut down
on the master enclosure.
6.
If there are no expansion enclosures, go to step 7.
If there are expansion
enclosures, turn O
FF
ac input boxes for each
expansion enclosure by
pressing O on each ac power
switch (C
1).
ALLOUT
7.
Turn O
all the ac input
FF
boxes for the master
enclosure by pressing O on
each ac power switch
(C
1).
ALLOUT
8.
Disconnect the power cord from the front of the power supply.
1) on an expansion enclosure until the
1
all the
1
2
CXO6303A
1) on the
ALLOUT
CXO5488B