Table of Contents
Advertisement
Operating an UltraSCSI enclosure with a blower removed
significantly changes the air flow pattern and reduces air
flow through the components. If a blower is removed and
not replaced within approximately 8 minutes, the array
controllers will shut down and then the EMU will turn O
the dc power distribution.
Table 8–1
Removing a Blower
1.
Use both hands to firmly
press the upper and lower
blower mounting tabs
(C
3 and 4)
ALLOUTS
together to release the
blower.
2.
Pull the defective blower straight out.
3.
Place the blower into an electrostatic bag.
Enclosure Blowers
Caution
UltraSCSI RAID Enclosure 8–5
FF
2
3
1
4
CXO5753B
Advertisement
Table of Contents
