Table of Contents
Advertisement
Table 4–7
Installing a PVA (Continued)
3.
Pull the PVA extractor latches outward. Push the PVA into the slot
until the extractor latches engage the enclosure, then push the
extractor latches inward to seat and secure the PVA.
4.
Ensure that the PVA SCSI ID switch is set to the valid number for the
enclosure:
•
Master enclosure — 0
•
First expansion enclosure — 2
•
Second expansion enclosure — 3
5.
If there are no expansion enclosures, go to step 6.
If there are expansion
enclosures, turn O
N
input boxes for each
expansion enclosure by
pressing I on each ac power
switch (C
1).
ALLOUT
6.
Turn O
all the ac input
N
boxes for the master
enclosure by pressing I on
each ac power switch
(C
1).
ALLOUT
7.
After the array controller is operational, verify that the subsystem is
functioning properly.
Power Verification and Addressing
all the ac
1
2
UltraSCSI RAID Enclosure 4–15
CXO5488B
Advertisement
Table of Contents
