Adding An Action Item To An Existing Macro; Adding A Macro To An Existing Macro; Deleting A Macro; Adding An Automation Device To Your Auditorium - Christie 163-059105-XX User Manual

Adding an action item to an existing macro

Add an action item to a macro to have the projector perform an additional action when the macro
runs.
1. In the left navigation menu, select Automation > Macro Editor.
2. In the top right pane, select a macro from the list.
3. Add an action item to the macro:
a) In the left pane, expand the My Auditorium list.
b) Under Automation, Playback, or Projector, select the action item.
4. To save the macro, select Save
5. To test the macro, select Test.

Adding a macro to an existing macro

Combine macros to have the projector complete a complex set of actions.
1. In the left navigation menu, select Automation > Macro Editor.
2. From the list in the top right pane, select a macro.
3. In the left pane, expand the macro list.
4. Select a macro.
5. Sap Save .

Deleting a macro

Delete macros when they are no longer required.
1. In the left navigation menu, select Automation > Macro Editor.
2. From the list in the top right pane, select a macro.
3. Select Delete.
4. To confirm the deletion, select Delete.

Adding an automation device to your auditorium

Add an automation device so it can be controlled remotely and can communicate with other theater
hardware.
1. In the left navigation menu, select Automation > My Auditorium Devices.
2. Select + New Device.
3. In the Name field, enter a name for the device.
4. In the Device Type list, select the device type.
5. In the Select Device list, select the device.
CineLife+ User Guide
020-103073-10 Rev. 1 (02-2023)
Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
.
Automation
98