Connect Devices to the Projector
3.1
Connect a Communications Device
To communicate with the projector, connect the equipment to the Ethernet hub or switch.
For applications or equipment utilizing serial communications, use the Christie-proprietary serial protocol to
connect to the RS232 PIB port on the PIB. When using Christie serial protocol over Ethernet, connect to port
5000. NOTICE: The RS232 PIB port located on the PIB faceplate utilizes Christie-proprietary protocol and is
intended for Christie accessories or automation controllers only.
3-2
Figure 3-2 Connecting Communications
CP4220 Setup Guide
020-100692-02 Rev. 2 (05-2014)