Error Cause And Remedy - Brother FAX-2840 Service Manual

3.4

Error Cause and Remedy

Check the User Check items first. If an error cannot be resolved, follow the procedures in
numerical order in the Step field.
Error code 0B, 0E and 0F
These errors do not usually occur in the normal use. The conceivable causes are noise
around the installation site, fluctuation of the power supply voltage, and failures in the
software.
---
An unidentified error occurred.
<User Check>
• Turn OFF the power switch, and turn it ON again after a while.
Step
1 Main PCB failure
Error code 10 to 18
These errors do not usually occur in the normal use. The conceivable causes are noise
around the installation site, fluctuation of the power supply voltage, and failures in the
software.
---
An unidentified error occurred.
<User Check>
• Turn OFF the power switch, and turn it ON again after a while.
Step
1 Main PCB failure
Error code 19
Replace Drum
Open the Front Cover, replace the Drum Unit. Refer to the User's Guide for instructions.
The drum reached the end of life while the WSW 78 selector 1 was set to ON.
<User Check>
• Turn OFF the power switch, and turn it ON again after a while.
Step
1 Main PCB failure
Cause
Replace the main PCB ASSY.
Cause
Replace the main PCB ASSY.
Cause
Replace the main PCB ASSY.
2-24
Remedy
Remedy
Remedy
Confidential