How To Assign A Terminal To A Base Unit - Ingenico iWL200 series User Manual

4. Press the GREEN button again and the transaction
log for that acquirer will be printed. It will show the
previous 20 transactions for that acquirer. Step 3 and 4
will repeat for each acquirer.
Once all have been printed, press the GREEN button and the terminal will return to the READY
prompt.

44. How to Assign a Terminal to a Base Unit

(Bluetooth Only)
Place the terminal handset onto the base unit.
1. At the READY prompt press the MENU button to
display the System Menu.
2. Use the arrow buttons to view the available options
and press the GREEN button when the Select Function
option is highlighted.
3. Key enter the number 36 and press the GREEN
button. You will then be asked to swipe the
Supervisor Card or enter your Supervisor Code through
the terminal.
4. To assign the terminal to a base unit press the
GREEN button. To cancel the operation, press the
YELLOW button.
5. Select ASSIGN TO BASE and press the GREEN
button.
6. Place the handset onto the base unit if you have not
already done so.
The terminal will display different screens to confirm that the base unit assignment is in progress.
The terminal will finally confirm that the base unit assignment was successful and will
automatically return to the ready prompt after three seconds.
Assigning a Handset to more than one Base
Your handset can be assigned to up to three bases. If you are not in range of your primary base
unit, you can select from two others that the handset is assigned to in order to complete your
transaction. Follow the prompts below to assign your terminal to more than one base.
1. At the READY prompt press the MENU button to
display the System Menu.
2. Use the arrow buttons to view the available options
and press the GREEN button when the Select Function
option is highlighted.
3. Key enter the number 36 and press the GREEN button.
You will then be asked to swipe the Supervisor Card or
enter your Supervisor Code through the terminal.
Print Transaction Log
Continue?
Enter=YES
SYSTEM MENU
Totals
Print Function Codes
Select Function
Key in Function Code
and then press ENTER
SYSTEM
Radio Setup?
Enter=YES
RADIO SETUP
Assign To Base
Select Base
Remove Base
Print Base Info
Test Radio Link
SYSTEM MENU
Totals
Print Function Codes
Select Function
Key in Function Code
and then press ENTER
Clear=NO
Clear=NO
Page 37