Installing The Terminal On The Base - Ingenico iWL2 Series User Manual

Contactless (optional)
•
Bring the card firmly up to the active zone. Keep the
card close to the reader during the transaction
•
The 4 LEDs indicate transaction processing (as shown
on the picture) . On color screen terminal virtual LEDs
are displayed.
The terminal behavior for the cardholder may depend on:
•
The terminal environment
•
Local usage (language...)
3.4. Installing the terminal on the base
Connecting the terminal on the base
Place the iWL2XX between the flanges on its base so that the contacts of the iWL2XX
engage on the contacts provided on the base (see picture below).
Using the modem base (if modem fitted on your base)
Once installed, the base modem is designed to always be plugged into the mains network
and be connected to a telephone line. The telephone line should not be shared.
The portable may be placed back on its base after each transaction. It must be placed on its
modem base when telephone network is used for : authorization request, remote
collection, downloading.
iWL2xx Wireless Series •
900003061 R11 000 04/1050
9/28
Copyright © 2011 Ingenico
All rights reserved
4 leds
(B&W display only)
Active
zone