Entering Function Codes; Waiter Ids (Restaurants) - Ingenico iWL200 series User Manual

6. You will now be shown a list of the individual
acquirers. Press the GREEN button to reconcile an
acquirer or press the YELLOW button if you do not want
to reconcile a particular acquirer.
7. Once the desired acquirer has been selected, the terminal will dial the selected acquirer. You
will be prompted to wait while the terminal prints a banking report.
8. After all acquirers have been banked, tear off the receipt and press the GREEN button. The
terminal will return to the READY prompt.
PLEASE NOTE: If Stored or Session Totals Not Agreed is printed on your End of Day
receipt, please contact Customer Services.

39. Entering Function Codes

There may be occasions when you have further requirements of your terminal. These can be met
through the use of Function Codes.
1. At the READY prompt, press the MENU button to display the System Menu. Use the arrow keys
to highlight and select functions and press the GREEN button.
2. Key enter the function code required and then press the GREEN button.
Once the function code has been entered, follow the prompts displayed by the terminal. You may
be prompted to swipe your Supervisor Card or enter your Supervisor Code. The following codes
are available for you to use:
CODE
16
30
33
36
38
40
86
91

40. Waiter IDs (Restaurants)

Default Waiter 0
A default waiter, Waiter 0: SHARED will be created automatically by the terminal. This can be
used if you do not want to create individual Waiter IDs.
All sale transactions with gratuity will add tips/gratuities to this waiter without the need for a Waiter
ID to be entered during transaction processing.
The total of all Waiter 0 tips/gratuities will be printed as part of the Waiter Totals Report showing
the total value of tips/gratuities performed.
TITLE
Print Transaction Log
Set Date/Time
Power Up Banner Setup
Radio Setup
Sleep Parameters
Waiter Setup
Connection Test
GSM Network
End-of-Day Banking
Bank <acquirier>
Enter=YES
DESCRIPTION
Refer to section 42
Refer to section 40
Refer to section 46
Refer to section 43
Refer to section 41
Refer to section 39
Allows you to connect to host
Refer to section 47
Clear=NO
Page 33