Changing A Waiter Id - Ingenico iWL200 series User Manual

Adding an Individual Waiter ID
Your terminal can be configured to recognise individual Waiter IDs. These make it possible to
identify which staff member has dealt with the transaction. The Waiter ID will be printed on the
receipt.
1. At the READY prompt press the MENU button to
display the System Menu.
2. Using the arrow button select the Select Function
option and then press the GREEN button.
3. Enter the number 40 and then press the GREEN
button.
4. Swipe the Supervisor Card or enter your Supervisor
Code through the terminal.
5. If you want to proceed to the Waiter Setup menu, press
the GREEN button. If not, press the YELLOW button.
6. Using the arrow button select Add and then press the
GREEN button.
7. Your terminal will automatically allocate the next
available Waiter ID. Key in the text/name description
and press the GREEN button (this field is limited to 10
characters).
(Please refer to Section 12 of this guide for instructions
on how to enter letters.)
Deleting a Waiter ID
Follow steps one to six above and select DELETE from
the WAITER SETUP menu, now proceed as follows:
1. Key in the Waiter ID code that is to be deleted and
then press the GREEN button.
2. If you want to proceed to delete the Waiter, press the
GREEN button.
If not, press the YELLOW button.

Changing a Waiter ID

Follow steps one to six of Section 39 (Adding an Individual Waiter ID) and select Change Name
from the WAITER SETUP menu. Now proceed as follows:
Page 34
SYSTEM MENU
Totals
Print Function Codes
Select Function
EFT
Waiter Setup?
Enter=YES
WAITER SETUP
Add
Delete
Print
Change Name
Delete All
Create Defaults
ADD WAITER
Key in Waiter's Name
and then press ENTER
DELETE Waiter
Key in Code to Delete
and then press ENTER
DELETE Waiter nn
<name>
Enter=YES
Clear=NO
Code nn
aaaaaaaaa
nn
Clear=NO