How To Print A Transaction Log; How To Assign A Terminal To A Base Unit - Ingenico EFT930G User Manual

3. Press ENTER to continue setting Sleep Parameters or Clear
to cancel.
4. Enter the number of minutes before which the terminal
goes to sleep and then press the GREEN button.
The terminal will return to the READY prompt.

33. How to Print a Transaction Log

This function allows you to print a log of your last 100 transactions, should the need arise for
example to check any financial discrepancies.
1. At the READY prompt, press the MENU button twice. Use
the arrow buttons to view the available options and press
the GREEN button when the Select Function option is
highlighted.
2. Key enter the number 16 and press the GREEN
button. You will then be asked to swipe the Supervisor Card
or key in Supervisor code.
3. To print a transaction log for the selected acquirer, press
the GREEN button. If not, press the YELLOW button.
4. Press the GREEN button again and the transaction log for
that acquirer will be printed. It will show the previous 20
transactions for that acquirer. Step 3 and 4 will repeat for
each acquirer. Once all have been printed, press the GREEN
button and the terminal will return to the READY prompt.

34. How to Assign a Terminal to a Base Unit

Place the terminal handset onto the base unit.
1. At the READY prompt press the MENU button twice.
2. Use the arrow buttons to view the available options and
press the GREEN button when the Select Function option is
highlighted.
3. Key enter the number 36 and press the GREEN button. You
will then be asked to swipe the Supervisor Card or key in
Supervisor code.
SYSTEM
Sleep Parameters?
Enter=YES
Number of Mins before
going to sleep (1-30)
and then press ENTER
SYSTEM MENU
Totals
Print Function Codes
Select Function
Key in Function Code
and then press ENTER
Print Transaction Log
<Aquirer Name>?
Enter=YES
Print Transaction Log
Continue?
Enter=YES
SYSTEM MENU
Totals
Print Function Codes
Select Function
Key in Function Code
and then press ENTER
Clear=NO
xx
Clear=NO
Clear=NO
Page 31