Ingenico iWL200 series User Manual page 30

Switching Comms - F87 Usage
Select Function 87 and proceed as follows:
Swipe supervisor card or enter supervisor code.
Continue with either:
a) 'Switch from PSTN to IP' or
b) 'Switch From IP to PSTN'
Switching from PSTN to IP
Press ENTER
Further messages will be displayed during the terminal
re-configuration
After printing a 'CARD TYPES ACCEPTED' report, the
terminal will return to the READY screen.
Switching from IP to PSTN
Press ENTER
Press ENTER if required (for use with a Switchboard) or
press CLEAR to select NO (for use with a Direct Line).
Key in 'Dial Prefix' and press ENTER
(or press CANCEL to return to previous screen).
Press ENTER if used or press CLEAR if not used
(as appropriate).
Further messages will be displayed during terminal
re-configuration.
After printing a 'CARD TYPES ACCEPTED' report, the
terminal will return to the READY screen.
SWIPE SUPERVISOR CARD
SYSTEM
Switch Comms ?
Enter=YES Clear=NO
Connection Method
Local Network
Contacting GEMS
via Local Network
Please Wait...
READY
Merchant Number:
1234567890
Connection Method
Telephone <PPP>
Dial Prefix Required?
Enter=YES Clear=NO
Key in the Number used
to get an Outside Line
and then press ENTER
Does the Tel. Line have
Call Waiting or 1571 ?
Enter=YES Clear=NO
Dialling GEMS
Tel.: <GEMS Tel.No>
DPP 100 Prefix NONE
Please Wait...
READY
Merchant Number:
1234567890
Page 29