Bluetooth Connection Indicators; Wifi Connection Indicators - Ingenico iWL200 series User Manual

10. Bluetooth Connection Indicators

This section of the display banner shows that the handset is connected to the base and also
details the serial number of that base. It further indicates the signal strength.
If this information is not displayed, or the serial number is flashing, then you need to move the
handset closer to the base unit.
If the 'B' symbol shown is displayed in BLUE, the handset
is in range of the base unit and can be used safely.
If the 'B' symbol shown is displayed in RED then the
handset is out of range of all the base units and cannot
be used. Please see section 44 for further details.
If the symbol shown on the right is displayed in GREEN
this indicates that the terminal is connected to a network.
This will only be displayed if your terminal is an ethernet
product.
If it is shown in white, it is not connected to the cable.
If it is shown in red, it is not connected to the network
If this symbol is a lowered receiver, the terminal is ready
to be used.
If this symbol is a raised receiver, the terminal is trying to
connect to the Host computer.

11. WiFi Connection Indicators

The main screen will look similar to the one shown below once the WiFi connection is established.
The following icons on the screen indicate the status of the connection:
Signal Strength
Page 10
Network Name
Connected to WiFi when in brackets
Connected to the
network when green