Ingenico iWL200 series User Manual page 27

Hide thumbs Also See for iWL200 series:
Table of Contents

Advertisement

9. IF YOUR TERMINAL IS CONFIGURED FOR CSC/
AVS (A CARDHOLDER VERIFICATION SERVICE)
PROCEED AS FOLLOWS:
If you see this prompt, key in the 3 digit security code,
which can be found on the signature strip on the back of
the customer's card. Now press the GREEN button.
PLEASE NOTE: The security code for American
Express cards is a four digit code and can be found on
the front of the card.
Your terminal will then prompt you to do the following:
Enter the numeric digits from the customers Post
Code, (i.e EH11 9YE would be entered 119) and
then press the GREEN button
Enter the customer's house number, (i.e Flat 5, 29
High Street would be entered 529) and then press
the GREEN button.
10. The terminal will now dial out for authorisation and the
authorisation code will be displayed. Press the GREEN
button.
The terminal will display the results of the address check. The result will be printed on the
receipts.
The security message will advise the response for any information entered at the Security Code,
Address and Post Code prompts.
Message Text
ALL MATCH
SEC CODE MATCH ONLY
ADDRESS MATCH ONLY
NO DATA MATCHES
DATA NOT CHECKED
11. To accept the transaction press the GREEN button
and a customer receipt will be printed. Press the GREEN
button again and this will print a copy of the receipt for
your records.
To decline the transaction press the YELLOW button and a void receipt will be printed for the
customer. Press the GREEN button again and a void receipt will be printed for your records.
Page 26
<transaction type>
Key in Security Code:
and then press ENTER
<transaction type>
Key in Numerics from
The Post Code:
and then press ENTER
<transaction type>
Key in first five digits
of the address:
and then press ENTER
<transaction type>
AUTH CODE: nnnnn
<Aquirer name>
press ENTER
Result
All data entered is correct
Only the Security Code is correct
Only the address is correct
None of the data entered is correct
The data has not been checked
AUTH CODE: nnnnn
<security messages>
Press ENTER to Accept
Press CLEAR to Decline

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents