Clerk Settings; Add Clerk Id; Delete Clerk Id - Ingenico iCT250 Quick Reference Manual

4. Use [▼] button or press [6] to highlight Demo and press [Enter].
Select Yes to enable/disable demo mode and then press [Enter].
5.
6. Press [Cancel] to go to the training idle screen.
NOTE:
The terminal must be removed from demo mode
before conducting live transactions. To return to "live"
mode, repeat the procedure in the steps above.
14 – Clerk Settings
The application allows you to track transactions by the clerk. From the
clerk menu, the user has the option to Add, Delete or Print a Clerk ID
list.

Add Clerk ID

This option allows you to add a clerk ID up to six (6) digits long.
1. At idle menu press [.,#*] for the administrator menu.
2. Key in the administrator name and password, and then press
[Enter].
Select [1] to highlight Clerk Menu.
3.
4. Select [1] to highlight Add ID.
5. Enter new clerk ID, and press [Enter].
Enter new clerk name, and press [Enter].
6.
7. Terminal will display "Clerk ID Added" if it is successfully added,
and then prompt "Add another?"
8. Select Yes to add another clerk ID, or No to return to the clerk
menu.

Delete Clerk ID

This option allows you to delete a previously entered clerk ID. The clerk
ID can only be deleted if there are no pending (unsettled) transactions
for that clerk.
1. At idle menu press [.,#*] for the administrator menu.
2. Key in the administrator name and administrator password, and
then press [Enter].
Select [1] to highlight Clerk Menu.
3.
26