Changing The Battery - Ingenico Move/2600 User Manual

4.6.4 Changing the battery

It is imperative to use the battery authorized by Ingenico.
There is danger of explosion if battery used is not
approved by Ingenico.
Disconnect the power supply unit
Turn product off by pressing simultaneously
(yellow key) for one second.
Remove the battery door (See chapter "Installation").
Lift the battery and remove it from its compartment.
Carefully disconnect battery by pulling on connector. Avoid
pulling wires to do not damage the battery.
Connect and install the new battery by following the instructions
in chapter "Installation".
In order to preserve the environment, dispose used battery in
compliance with current country recycling legislation.
Move 2600
900050198 R11 000 02 / 0123
Copyright© 2023 Ingenico -
Banks and Acquirers
17
International Holding SAS
All rights reserved
(dot key) and