Setting Parameters (Menu) - Sartorius LP Models Operating Instructions Manual

Setting Parameters (Menu)

Purpose
To configure the balance; i.e.,
adapt the balance to individual
requirements by choosing from
a list of parameter options in
a menu. You can block access
to this menu by assigning
a password.
Features
The parameter options are
divided into the following groups
(1st menu level):
1 Balance functions
2 Application programs
3 Application parameters
4 +/– parameter
(for over/under checkweighing)
5 Interface parameters
6 Print for weighing (print weights)
7 Print for application program
(print app. data)
8 Additional functions
9 Reset menu
Factory Settings
The factory-set configurations
are marked with an "o" in the list
starting on page 16
14
Preparation
Select the Setup menu:
Press M
> The Info, Menu and Input soft
keys are displayed in the text line
Select the parameter menu:
Menu soft key w
> Password prompt is displayed
Enter password using the alpha-
numeric input keys
Confirm password entered:
enter passw. soft key v
> Measured value line:
1 (1st menu level)
> Text line: Balance functions
k Select the next group: Press Y
k Select the next submenu
within a group (2nd menu level):
Press X
k Select previous group: Press y
k Return to next higher menu level:
Press x
Additional Functions
Exit the menu: Press M
> Restart the application
Print parameter settings:
– When the 3rd menu level
is selected: Press p
> Printout (example)
4 2 Auto print +/-
2 Off
– When the 2nd menu level
is selected: Press p
> Printout (example)
4 Parameter +/-
-------------------
4 2 Auto print +/-
2 Off
4 3 +/- ctrl ports
1 Within ctrl r
– When the 1st menu level
is displayed: Press p
> Prints all of the menu parameters
that are currently set