Sartorius LP Models Operating Instructions Manual page 25

Preparation
Configure Parameters for Calibration and Adjustment
Step
1. Turn on the balance
2. Select the Setup menu
3. Select the Balance Functions menu
4. Set parameters for:
– Calibration key function 1 9
– Calibration/adjustment
sequence 1 10
– isoCAL self-calibrating and
adjustment function 1 15
See the chapter entitled "Setup"
5. Exit the Setup menu
Key (or instruction)
e
M
menu soft key w
x y Y X
M
Operating the Balance
Display/Output
info--menu--input
25