Balance Operating Menu; Accessing And Setting The Balance Operating Menu - Sartorius Basicplus Manual

bp-a-01a.tif
Back Panel
Menu Access
Switch
bp-r1-d.tif
bp-a-02a.tif
bp-a-03a.tif
bp-a-04a.tif
6

Balance Operating Menu

Accessing and Setting the Balance Operating Menu

Accessing the Menu with the e and t keys:
– Turn the balance off and back on again by pressing e
– While all segments are displayed ("Segment Test"), briefly press t
– "1" is displayed
Note:
If " –1" is displayed, this indicates that the operating menu is blocked by the
menu access switch.
The menu access switch is located on the rear panel of the balance (see
figure on the left).
To unlock the menu to change the menu code settings, move the switch to the
right.
Move the switch back to the left after you have made your menu code
settings !
Selecting a Code Setting using the q and the p Keys:
– Press q to select the desired number. Numbers increase by one with
each press and go from 9 back to 1 again (1, 2, 3 ... 8, 9, 1 ...).
– Press p to move from the first code number to the second and third
numbers (1st - 2nd - 3rd - 1st, etc.).
Changing and Storing a Setting with the t Key:
– Briefly press the t key to confirm the new setting. A "°" appears after
the new setting, e.g., "3-1-3 °".
– To store the setting, press one of the t keys for more than two seconds.