Weighing In Percent - Sartorius LP Models Operating Instructions Manual

Weighing in Percent L
Purpose
This application program allows
you to obtain weight readouts
in percent which are in proportion
to a reference weight.
36
Available Features
– Reference percentage "pRef"
loaded from long-term memory
when you turn on the balance
– Optional balance configuration in
the Setup menu for automatically
initializing this application and
loading the most recent reference
percentage "pRef" entered with
reference weight "w100%" when
you turn on the balance
– Minimum load checked
when the balance is initialized
(factory setting: 10 display
increments; can only be changed
by the Sartorius FastFactory)
– Reference percentage "nRef"
entered using the numeric keys
– Reference weight "Wxx%"
entered using the numeric keys
– Storage parameter (rounding-off
factor) for storing the reference
weight "W100%" to calculate the
percentage can be configured
– Configuration of decimal places
displayed with a percentage
– Optional configuration for having
the reference weight "Wxx%"
and reference percentage
automatically output via the data
interface port after initialization of
the weighing-in-percent program
(print application parameters)
– Long-term storage of
the last reference percentage
"pRef" entered
– Long-term storage of the
last reference weight "W100%"
entered, by configuring automatic
initialization (auto-start)
– Toggle between two weight units
by pressing w
Factory Settings
Auto-start application (automatic
initialization with reference
percentage and reference weight
loaded from long-term memory):
off (3 10 2)
Counting/percent parameter
(accuracy when storing reference
weights): display accuracy (3 5 2)
Number of decimal places displayed
in "weighing in percent" mode:
2 decimal places (3 6 3)
Printout application parameters
(automatic output of application
parameters): off 7 1 1)