Configuring The Balance Setting The Language; Info' Display - Sartorius LP Models Operating Instructions Manual

Configuring the Balance
Purpose
You can configure your Master
balance to meet individual
requirements by entering user data
and setting parameters in the Setup
menu. You can also configure the
display to show balance-specific
information (such as the serial no.).
Setting the Function Switch for Using
the Balance in Legal Metrology
To use the balance in legal
metrology, the following functions
must be activated by setting the
switch as described below:
– Display: Verification scale interval e ;
lower weighing range limit: Min
– External calibration/adjustment:
Blocked
– MP8 interface emulation active
Preparation
Remove the covering plate from the
back of the balance housing
Move switch 1 in the direction of
the arrow
> Switch up:
external calibration blocked
Switch down:
external calibration accessible
> Note:
Do not move Switch 2
10
Setting the Language
Available Features
pro
You can choose from 5 languages
for the information display:
1 German
2 English (factory setting)
3 English with U.S. date/time
format
4 French
5 Italian
6 Spanish
Selecting the Language
Enter the corresponding number
Press M

'Info' Display

Purpose
To have information about the
equipment displayed.
Features
You can have the following
information displayed:
– Program version number
for the display and control unit
– Program version
for the weighing cell
– Balance model
– Serial number of the weighing cell
Display Balance Information
Select the Setup menu:
Press M
Select information:
Press the info soft key q
> Readout in measured value line:
Version number of the display and
control unit (see also "Data Output
Functions," pages 56–57, in the
chapter entitled "Operating the
Balance")
k Select next item of information:
Press Y
> Readout in measured value line:
Next information
k Select previous information:
Press y
> Readout in measured value line:
Previous information
k Print information: Press p
> Printout (example)
Mod. LP6200S
Ser. no. 60406906
Ver. no. 01-30-13
Software version
(display and control unit)
Ver. no. 00-20-07
Software version
(weighing platform)
Exit the Setup menu:
Press M
> Balance returns to previous status