Data Output Functions - Sartorius LP Models Operating Instructions Manual

Max 4200 g
Min
e=
d= 0.01 g
1234.56
01-30-13
-96-Abc1
56

Data Output Functions

There are 3 options for data output:
– Output to the display/control unit
– Output to a printer (generate a printout)
– Output to a peripheral device (e.g., computer) via the interface port
Output to the Display and Control Unit
The display is divided into 6 sections:
– Line for metrological data
– Bar graph
– Measured value line
– Weight unit display
– Symbol display
– Text line
Line for Metrological Data (when used as a legal measuring instrument)
This line shows:
– Maximum balance capacity (e.g., 4,200 g)
0.5 g
– Minimum balance capacity; the weight must not go below this limit when
the balance is used in legal metrology
0.1 g
– Verification scale interval of the balance; irrelevant if the balance
is not used in legal metrology (e.g., 0.1 g)
– Readability: Indicates the actual scale interval
(display increment of the balance) (e.g., 0.01 g)
Bar Graph
In the bar graph, weighing results are displayed either
Measured Value Line
This line displays:
– The current weight readout
(digits bordered with a broken line are invalid in use for legal metrology)
– Information on the balance and display and control unit
(e.g., version numbers)
– Data entered by the user (e.g., lot number)
– as a percentage of the maximum
balance capacity, or
– in relation to a target value,
with tolerance limits indicated.