Sartorius LP Models Operating Instructions Manual page 60

Auto Print
You can have the weight readout
(or the value displayed in the
measured value line) printed
automatically; this printout can
be generated after a certain number
of display updates; you can also
configure whether or not the
auto-print function is dependent on
the stability parameter. The display
update frequency depends on
both the model of the balance and
the current operating state.
Print Net-Total
When you run the net-total
application, you can have the
weight of the last component
weighed (net value) or the total
weight (tare value) printed
automatically.
Print Animal Weights
When using the animal weighing
application, you can have the results
printed automatically upon
completion of the averaging process.
You can also have both the weight
and the calculated result printed.
Auto Print +/–
With the over/under checkweighing
application, you can have the result
printed automatically if it lies within
a defined range (acceptable value).
Data Output Functions
Printing a Data Record
Print for use in legal-for-trade
applications:
You can configure the scale operating
menu to generate a printout that
conforms to the regulations for use
in legal metrology (last digit marked)
on a Sartorius printer:
– YDP01IS: 5 5 4
– YDP02:
5 5 5
– YDP03:
5 5 6
60
N + 1530.00 g
S ID 12345678901234
Stat
Stat L
Stat H
Comp1 + 1821.48 g
mDef 10
Mul 0.00347
x-Net + 1530.00 g
x-Res + 5.30 o
N + 1530.000 g
Setp + 1000.035 g
Min + 981.054 g
Max + 1020.063 g
N + 1010.147 g
Net weight
Sample ID
Display blank
Display underload
Display overload
First net weight
Number of subweighs for averaging
Multiplication factor
Result of averaging
Calculated result
Net weight
Target weight
Lower limit
Upper limit
Printout of acceptable values