Sartorius LP Models Operating Instructions Manual page 41

Practical Example
Weighing in Several Components
(Parameter settings: Net-total application program 2 1 6; print all parameters 7 1 2)
Step
1. Select the net-total application
in the Setup menu
2. Prepare a container for the
components
3. Tare the balance
4. Add first component
5. Store component value
6. Add next component
7. Store component value
8. If desired, add further
components
9. Display total weight
Key (or instruction)
see "Preparation"
Place the empty container
on the balance
t
Place the first component
in the container
1. comp soft key v
Place next component
in the container
2. comp soft key v
Repeat steps 6 and 7
as needed
w
Operating the Balance
Display/Output
Comp1 + 952.48 g
Comp1 + 952.48 g
Comp2 + 2837.12 g
41