Sartorius LP Models Operating Instructions Manual page 44

Practical Example
Determining Animal Weight with Automatic Start of 20 Subweighing Operations for Averaging;
Automatic Printout of the Number of Subweighing Operations and of the Animal Weight
Step
1. Select the animal weighing
application in the Setup menu
2. Set the following animal weighing
parameters in the Setup menu:
– Animal activity: Active
– Start animal weighing: Automatic Setting 3 8 2 in Setup menu
– Printout: On: anim.wt.*fact.
– Print: All parameters
3. Prepare a container (cage)
4. Tare the balance
5. Enter number of subweighing
operations for averaging
6. Save number
7. Weigh the first animal
8. Start automatic animal weighing
44
Key (or instruction)
see "Preparation"
Setting 3 7 3 in Setup menu
Setting 3 9 3 in Setup menu
Setting 7 1 2 in Setup menu
Place empty cage on
the balance
t
2 0
mdef soft key w
Place 1st animal in cage
start soft key v
Display/Output
mdef= x10
mdef= x10
mul
mdef= 20
weight value fluctuates due to animal activity
mdef= 20
M =-20xxxxx---
start
start
mdef S-id
start
start