3・4Ch (3・4Channel); 2Way（2Way; 3Way（3Way - Ko Propo EX-2 Instruction Manual

3・4CH 3・4ch Menu
Settings related to 3CH and 4CH operations.
《Functions》
▶ MODE
GYRO
OFF
2WAY TWIN
3WAY 4WS
5WAY AMP
ANLOG T-MIX
▶ SET
Set the usage choice for channels 3 and 4 modes.
The MODE of 3CH or 4CH s selected from the right.
Change the setting of the item chosen with the SET key.
３CH MODE
５WAY
SET
４CH MODE
２WAY
SET
The functions which may be set are the same for both
P
3CH and 4CH. Set them to match the desired purpose.
【Default】
3CH MODE : 5WAY
4CH MODE : 2WAY
▶ 2WAY MODE
Modify the 2-interval output settings.
【Example】
May be used to activate/deactivate an engine starter
unit or a semi-trailer's support legs.
３CH MODE : 2WAY
START : POS1
KEY : OFF
+
3・4CH
GYRO
OFF
TWIN
2WAY
４WS
3WAY
5WAY AMP
T-MIX
ANLOG
POS1 : 0
POS2 : 100
【Setting Range】
START：POS 1、POS 2（Default：POS 1）
Sets the starting position.
KEY：OFF、ET1 〜 5（Default：OFF）
Assigns a key to use for switching positions.
POS 1：-100 〜 100（Default：0）
Sets Position 1's output position.
POS 2：-100 〜 100（Default：100）
Sets Position 2's output position.
▶ 3WAY MODE
Modify the 3-interval output settings.
【Example】
May be used for gear changing operations or when you
wish to set a 3-interval control scheme for the servo.
START : POS1
KEY : ET3
+
【Setting Range】
START：POS 1、POS 2、POS 3（Default：POS 1）
Initial position is configurated.
KEY：OFF、ET1 〜 5（Default：OFF）
Assigns a key to use for switching positions.
POS 1：-100 〜 100（Default：-100）
Sets Position 1's output position.
POS 2：-100 〜 100（Default：0）
Sets Position 2's output position.
POS 3：-100 〜 100（Default：100）
Sets Position 3's output position.
ー
28
3CH MODE : 3WAY
POS1 : -100
POS2 : 0
POS3 : 100
SET
ー