Time Zone; Timer Settings; Wake Up Timer - Canon Laser Shot LBP5970 User Manual

NOTE
In some countries and regions, time is advanced throughout the summer season.
The period in which this is applied is called "Daylight Saving Time".

■ TIME ZONE

GMT-12 to GMT+12
Specifies the time zone according to the region where the printer is being used.
IMPORTANT
After changing the settings for this item, cycle the power of the printer or perform a
hard reset to make the settings effective.
NOTE
The standard time zones of the world are expressed globally in terms of the
difference in hours (± up to 12 hours) from GMT (± 0 hours). A time zone is a region
throughout which this time difference is the same. An area which shares the
same-time zone difference is called a time zone.
* The time at the Greenwich Observatory in England is called GMT (Greenwich Mean Time).

TIMER SETTINGS

■ WAKE UP TIMER

OFF*, ON
Specifies whether the printer should use the Wake Up function that releases
Power Save Mode (the Panel Off mode, the Printer Power Save mode, and the
Deep Sleep mode).
If ON is specified, Power Save Mode (the Panel Off mode, the Printer Power Save
mode, and the Deep Sleep mode) is released when the time specified in WAKE
UP TIME (See the next item) has elapsed.
If OFF is specified, the printer does not use the Wake Up function.
NOTE
The Wake Up function is for releasing the printer from Power Save Mode (the Panel
Off mode, the Printer Power Save mode, and the Deep Sleep mode). When the
printer is OFF, the Wake Up function does not function.
SETUP Menu Settings
5
5-23