Canceling The Process Currently Being Performed (Soft Reset) - Canon Laser Shot LBP5970 User Manual

Cancel Job
1
Press [Cancel Job].
2
OK When canceling the job, press [OK].
CANCEL?
03 CANCELING JOB
00 READY
<03 CANCELING JOB> appears, and the print data being processed is canceled.
The job is canceled when <00 READY> appears.
IMPORTANT
You cannot operate the printer while <03 CANCELING JOB> is displayed.
Canceling the Process Currently Being Performed (Soft
Reset)
If you want to cancel the process currently being performed, perform [Soft Reset]
using the following procedure. A soft reset deletes the print data received by all the
interfaces, the job being processed, and the print data in the printer memory.
IMPORTANT
Be sure to operate the printer from the computer to cancel printing before canceling the
•
job from the printer (Soft Reset).
When a soft reset is performed, the data being printed and the data being received by all
•
the interfaces is deleted. Therefore, perform printing from the computer again as needed.
The data that has been already sent to the memory are all deleted even if it is the data of
•
other interface. If you are using the printer on a network, be careful so that this operation
does not affect the data from other computers when performing this procedure.
NOTE
Hard resets delete all the registered files such as the form data saved in the RAM of the
printer, but soft resets do not delete them.
1
Press [Reset].
Reset
RESET
SOFT RESET
The RESET menu is displayed.
A4
→
Canceling a Job 2-61
2