Canceling All The Jobs (Hard Reset) - Canon Laser Shot LBP5970 User Manual

2
Utility
Settings
OK
2

Canceling All the Jobs (Hard Reset)

When you want to delete all the jobs and data sent to memory for some reason,
perform [Hard Reset] using the following procedure. A hard reset deletes the print
data received by all the interfaces, the job being processed, and the print data in
the printer memory.
IMPORTANT
If the printer is reset while it is receiving data, the data that has not yet been sent to the
•
memory will be sent after the reset. However, the data may not be printed properly.
The data that has been already sent to the memory are all deleted even if it is the data of
•
other interface. If you are using the printer on a network, be careful so that this operation
does not affect the data from other computers when performing this procedure.
1
Reset
Utility 2
Settings
2-62 Canceling a Job
Select SOFT RESET using [
Holding down the [OK] key 3 seconds or more is the operation for HARD RESET.
SOFT RESET
03 SOFT RESET
When <03 SOFT RESET> disappears, the soft reset is completed.
Press [Reset].
RESET
SOFT RESET
The RESET menu is displayed.
Select SOFT RESET using [
SOFT RESET
] and [ ], then press [OK].
→
→
] and [ ].
→