STOREJOB LIST
-
Prints a list of the jobs stored in a box (the jobs saved on the hard disk).
The store job list prints the box name, box number, file name, and others.
NOTE
If a password is specified for the box, the jobs in the box are not printed on the
•
store job list.
This item is displayed only when an optional hard disk is installed, HARD DISK is
•
set to ON, and there is any saved job.
STOREJOB PRINT
-
Prints a job stored in a box.
To store a job in a box, select [Store] in the printer driver, and then specify the box.
Because the jobs in a box are not deleted even after turning the printer OFF, it is
convenient if you store the documents that you want to print repeatedly in a box.
Perform a store job print using the following procedure.
1. Select STOREJOB PRINT in the JOB menu, then press [OK].
2. The box numbers are displayed. Select the number for the box in which the job
is stored, then press [OK].
3. If <PASSWORD> appears in the display, press [OK], and then enter the
password.
If a password is not specified only for the box, the entry screen for entering a
password does not appear. Proceed to Step 4.
4. Select the name of the target file, then press [OK].
The specified file is printed.
NOTE
The password is to be specified only with numbers of 1 to 7 digits. Enter the
•
password using the following keys on the control panel.
- Increases/decreases number .............[
- Moves digits .......................................[
- Determines the entered password ......[OK]
The saved jobs remains in the hard disk even after being printed. When you want to
•
delete the saved jobs, use the Remote UI. (See Remote UI Guide)
Up to the total of 100 jobs in all the boxes can be saved.
•
This item is displayed only when an optional hard disk is installed, HARD DISK is
•
set to ON, and there is any saved job.
] [
]
] [
]
JOB Menu Settings
5
5-111