BARDIMM
5
FREESCAPE
UFR II SETUP Options
PAPER SAVE
5-80
SETUP Menu Settings
DISABLE*, ENABLE
You can enable or disable the Bar Code Printing function of the printer.
If ENABLE is selected, the printer will generate bar codes when it receives bar
code commands from the host computer.
If DISABLE is selected, bar codes will not be generated, even if bar code
commands are sent from the host computer.
IMPORTANT
If you are not printing the bar codes, make sure that DISABLE is specified for this
item.
Otherwise, the processing speed of regular print jobs may be reduced.
NOTE
This item is displayed only when an optional PS/Barcode ROM is installed.
~*, ", #, $, /, \, ?, {, }, |, OFF
You can specify the AEC (Alternate Escape Code) to be used for bar code
commands when the host computer does not support the standard Escape Code.
NOTE
This item is displayed only when an optional PS/Barcode ROM is installed.
ON*, OFF
Specifies whether the printer outputs the blank page that can be created due to
no data existing in the page data sent from an application.
If ON is specified, the printer does not output the blank page. If OFF is specified,
the printer outputs the blank page.
If you use this function, you can save paper because the blank pages are not output.