Download  Print this page

Canon Laser Shot LBP3200 Getting Started Manual

Laser beam printer.
Hide thumbs

Advertisement

Laser Beam Printer
Getting Started Guide
Read This Manual First.
Thank you for purchasing the Canon LASER SHOT LBP3200.
Please read this manual thoroughly before operating the printer.
After reading this manual, keep it in a safe place for future reference.
Taking the Printer out of the Package and Installing the Printer
Step1
Installing the Toner Cartridge
Step2
Plugging the Power Cord
Step3
Loading Paper
Step4
Connecting the Printer to a Computer and Installing the Software
Step5
p. 5
p. 9
p. 13
p. 14
p. 21

Advertisement

   Also See for Canon Laser Shot LBP3200

   Summary of Contents for Canon Laser Shot LBP3200

  • Page 1 Connecting the Printer to a Computer and Installing the Software Step5 Read This Manual First. Thank you for purchasing the Canon LASER SHOT LBP3200. Please read this manual thoroughly before operating the printer. After reading this manual, keep it in a safe place for future reference.
  • Page 2 ■ User's Guide Notice CD-ROM Canon makes no guarantees of any kind with regard to this manual. Canon Describes how to print, routine maintenance, and troubleshooting. shall not be held liable for errors contained herein or for consequential or incidental damages incurred as a result of acting on information contained in...
  • Page 3: Installation Site

    ● Install the printer in the following environment. Installation Site • A place where sufficient space can be secured • A well-ventilated room Installation Environment • A flat surface • A sturdy platform that can easily tolerate the weight of the printer To operate this printer safely and comfortably, install this printer in a place that meets the following conditions.
  • Page 4: Installation Space

    Installation Space System Requirements Secure space around the printer as shown below, and install the printer on a Operating system software environment platform that can tolerate the weight sufficiently. The dimensions of each part, • Microsoft Windows 98/Me • Microsoft Windows 2000/XP required peripheral space, and foot positions are shown in the figure.
  • Page 5 Carrying the Printer to the Installation Site CD-ROM [User Software for LBP3200] CAPT (Canon Advanced Printing Technology) software Once you decide the installation site, take the printer out of the package and USB Class Driver...
  • Page 6: Removing The Packing Materials

    Carry the printer to the installation site. Set the printer down carefully at the installation site. Step Hold the printer on both side as shown in the figure when carrying it. CAUTION Set the printer down slowly and carefully. Be careful not to hurt your hands.
  • Page 7 Remove the tapes that are securing the front cover or Assembling the Cassette Step cassette. Pull out the front part of the cassette from the printer. Insert the rear part of the cassette into the front part of the cassette as shown in the figure a a a a , then tilt the rear part of the cassette b b b b .
  • Page 8 Install the cassette protective cover to the back of the Step printer. Set the cassette in the printer. Push the cassette into the printer firmly until the front surface of the cassette is flush with that of the printer.
  • Page 9 Open the front cover. Installing the Toner When opening the front cover, put your hands into the opening on both sides of the printer, then slowly and strongly pull it out. Cartridge Step2 Step For details on handling the toner cartridge, see Chapter 5 "Routine Maintenance"...
  • Page 10 • Print quality may deteriorate if you touch or damage the drum inside the IMPORTANT toner cartridge. Be careful not to touch the drum or open the drum • If toner is not distributed evenly, this may result in a deterioration in print protective shutter.
  • Page 11 IMPORTANT While aligning the projection on each side of the toner • Do not pull the sealing tape diagonally, upwards, or downwards. If the tape cartridge with the toner cartridge guide, push the toner is severed, it may become difficult to pull it out completely. cartridge completely.
  • Page 12 Close the front cover. Step IMPORTANT • If you cannot close the front cover, confirm that the toner cartridge is set properly. If you close the front cover forcefully, this may cause damage to the printer. • Do not leave the front cover open for a long time after setting the toner cartridge.
  • Page 13 Plug the supplied power cord into the power socket. Plugging the Power Cord Step3 IMPORTANT • One AC power outlet should be used exclusively for the printer. • Do not plug the power cord into the auxiliary outlet on the computer. Step •...
  • Page 14: Loading Paper

    Load the paper lengthways in the cassette. Loading Paper Step4 This printer can feed paper from the cassette and the manual feed slot. This section describes only the procedure for loading plain paper of standard size. For instructions on loading heavy paper, transparencies, labels, envelopes, custom paper, see Chapter 2 "Loading and Delivering Paper"...
  • Page 15 • Do not lift the cassette by holding only the rear part of the cassette. If you While holding the lock release lever on the paper guide at do so, the rear part of the cassette may come off. the rear of the cassette, slide the paper guide to the mark indicating the appropriate paper size.
  • Page 16 While holding the lock release lever on the paper guide on Load the paper stack so that the rear edges touch the paper either side of the cassette, slide the paper guide to the mark guide. indicating the appropriate paper size. The paper guides on the sides of the cassette move together.
  • Page 17 NOTE Press down the paper stack as shown in the figure, then To print on letterhead paper or paper printed with a logo, load the paper so make sure that it does not exceed the load limit mark and that the printing surface faces down and the top edge comes toward the that it is loaded under the hooks on the paper guides.
  • Page 18: Setting Paper In The Manual Feed Slot

    Set the cassette in the printer. Slide the paper guides to the mark of the desired paper size. Push the cassette into the printer firmly until the front surface of the cassette is flush with that of the printer. The paper guides move together. B5 EXEC Step NOTE...
  • Page 19: Selecting The Paper Delivery Area

    CAUTION Selecting the Paper Delivery Area When setting paper, be careful not to cut your hands with the edges of the paper. This printer has two paper delivery areas: "face-down delivery area" and "face- up delivery slot". IMPORTANT • Set the paper straight. ■...
  • Page 20 ■ Face-up delivery slot Switching into the Face-up Delivery Slot Prints are delivered to the face-up delivery slot with the printing surface face up. The face-up delivery slot is suitable for printing on transparencies, To switch into the face-up delivery slot, open the delivery selection cover by envelopes or labels which tend to curl, as the face-up delivery slot feeds holding the edge as shown in the figure.
  • Page 21: Installing Software

    ■ For Windows 98/Me Connecting the Printer NOTE The screen shots used in this section are from Windows Me. to a Computer and Step5 Make sure that the power swich is turned OFF. Installing the Software Installing Software This section describes the procedure for connecting the printer to your computer with the USB cable, and installing the printer driver and the USB class driver.
  • Page 22 Turn ON the computer and start up Windows 98/Me. Click [Next]. Put the supplied "User Software for LBP3200" CD-ROM into the CD-ROM drive. If the CD-ROM is already set in the drive, take it out and put it into again. The CD-ROM menu will appear automatically.
  • Page 23 Select [Automatic Detection (recommend)] and click [Next]. After installation is complete, click [OK]. NOTE If the installation of the printer driver is not complete properly, see Chapter 6 "Troubleshooting" in the User's Guide to uninstall the CAPT software, then install it again. ■...
  • Page 24 Connect the printer to the computer with the USB cable. The message <The printer driver for the following language will be installed. Do you want to continue?> appears. Confirm the language and click [OK]. When the screen shown below appears, press of the "...
  • Page 25: After Completing Installation

    After Completing Installation If you double-click the [Canon LBP3200] folder on the desktop, the icon for each of [Canon LBP3200] group will be displayed. When the installation of the CAPT software is completed, the icon and folder...
  • Page 26 ■ For Windows XP The [Canon LBP3200] printer icon will be displayed in the • If you double-click the [Canon LBP3200] folder on the desktop, the icon for each [Printers and Faxes] folder. of [Canon LBP3200] group will be displayed.
  • Page 27: Printing A Test Page

    Canon LBP3200 Status Window • Shows the printer or printing status with an animation or sound. Select the [Canon LBP3200] icon, then select [Properties] You can pause or cancel the print job from this from the [File] menu. window. To display the Printer Status Window, click the...
  • Page 28 If the test page is printed properly, click [OK]. If you are using Windows 98/Me, click [Yes]. NOTE If the test page is not printed properly, see Chapter 6 "Troubleshooting" in the User's Guide to uninstall the CAPT software, then install it again. Now, the printer is ready to print.
  • Page 29 Online Help or User's Guide. Be sure to read it before using this printer. ■ CAPT (Canon Advanced Printing Technology) software, USB class driver ● Manuals This printer requires the CAPT (Canon Advanced Printing Technology) software that is contained in the accompanying CD-ROM to perform printing.
  • Page 30 CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan CANON U.S.A., INC. One Canon Plaza, Lake Success, NY 11042, U.S.A. CANON CANADA INC. 6390 Dixie Road Mississauga, Ontario L5T 1P7, Canada CANON EUROPA N.V. Bovenkerkerweg 59-61 P.O. Box 2262, 1180 EG Amstelveen, The Netherlands CANON COMMUNICATION &...

Comments to this Manuals

Symbols: 0
Latest comments: