Specifying The Size Of The Paper In The Multi-Purpose Tray - Canon Laser Shot LBP5970 User Manual

Specifying the Size of the Paper in the Multi-purpose Tray

When you loaded paper in the multi-purpose tray, specify the paper size for the
multi-purpose tray using the control panel. When using paper or envelopes of
standard size, specify its size. When loading non-standard size paper, specify
CUSTOM SIZE or CUSTOM SIZER. The paper size setting for the multi-purpose
tray is set to "A4" by default.
Specify the paper size setting for the multi-purpose tray using the following
procedure.
IMPORTANT
Match the paper size specified in the SETUP menu of the printer and that specified in the
•
printer driver. If they do not match, the message <PC LOAD "size"> appears. In this
case, the setting for TRAY PAPER SIZE is changed to that in the printer driver by
pressing [Online], allowing you to continue printing.
When non-standard size paper is loaded, specify the setting for TRAY PAPER SIZE in
•
the control panel as follows.
- When the paper is loaded in landscape orientation (Only when UFR II Printer Driver is
used): CUSTOM SIZE
- When the paper is loaded in portrait orientation: CUSTOM SIZER
When you change the paper loaded in the multi-purpose tray frequently, it is convenient if
•
TRAY PAPER SIZE in the control panel is set to MIXED SIZES. If TRAY PAPER SIZE is
set to MIXED SIZES, you do not need to specify the setting for TRAY PAPER SIZE each
time you load the different size paper. However, when specifying MIXED SIZES, make
sure that the size of the paper loaded in the multi-purpose tray matches the paper size
specified in the printer driver before printing. If they do not match, the printer may stop
printing, displaying the message <41 CHK PAPER SZE>, or a paper jam may occur. Be
sure to check if the paper size specified in the printer driver matches the size of the paper
loaded in the multi-purpose tray before using the printer.
When printing custom size paper from UFR II Printer Driver, you can load the paper
•
either in portrait or landscape orientation. However, if you want to print custom size paper
of its long edges 297.0 mm or less when TRAY PAPER SIZE is set to MIXED SIZES, load
the paper in landscape orientation. When you are not printing from UFR II Printer Driver,
load the paper in portrait orientation.
NOTE
The names of the following paper sizes are indicated by an abbreviation.
12 x 18: TxE, Ledger (11 x 17): LD, Legal: LG, Letter: LT, Executive: EX, Statement: ST,
Envelope DL: DL, Envelope COM10: CO, Envelope C5: EC5, Envelope Monarch: MO,
Envelope B5: EB5, Custom Size: 80 to 99, Custom SizeR/Long Size Paper: 80R to 99R,
Free/Mixed Sizes: FR
Loading Paper in the Multi-purpose Tray
3
3-59