E-mail Print (Only When the Hard Disk Is Installed)
An attached ﬁle in an
unsupported format was
The number of the
attached ﬁles exceeded
An e-mail in which
[From] is blank was
Received a divided mail.
An e-mail which
encoding or character
encoding was sent.
Received a mail of an
Invalid data was sent.
An e-mail in HTML
format was sent.
Change the format of the attached ﬁle into TIFF
Reduce the number of the attached ﬁles to 14
Enter a name in [From].
Apply the following remedies to send the e-mail
so that it is not divided.
- Reducing the size of the e-mail to be sent
(Reducing it to the size which cannot be
- Specifying the application settings so that the
e-mail is sent without being divided.
Change the encoding or character encoding
into that supported by this printer (See p. 2-34).
Change the content type into any one of the
following types that are supported by this
Change the content type of the multipart mail
into any one of the following types that are
supported by this printer.
If the mail is nested, the mail is supported only
when "multipart/alternative" is nested in
Check if the sent e-mail data is normal.
This printer does not support e-mails in HTML