Canon Laser Shot LBP5970 User Manual page 461

The back of the printed paper has smudge marks.
Cause
Remedy
Square areas that cannot be seen on the display appear around lines or text and are
printed in a different color from the other areas.
Cause
Remedy 1 When using the UFR II printer driver, set [Gray Compensation] to [Off].
Remedy 2 When using the PCL/UFR II printer driver, set [Halftones] to [High Resolution],
7
Remedy 3 When using the PCL/UFR II printer driver, set [Matching Mode] to [Gamma
Remedy 4 When using the PCL/UFR II printer driver, set [Matching Mode] to [Printer
7-66 When You Cannot Obtain Appropriate Printout Results
The size of the print data was larger than that of the loaded paper.
Check if the size of the print data matches that of the loaded paper.
A process that is different from the specified halftone process or color
process may be applied depending on the operating system or
application.
In order to specify the setting for [Gray Compensation], display the following
dialog box.
- For the UFR II printer driver: Display the [Advanced Settings] dialog box by
clicking [Details] in the [Quality] sheet, then clicking [Advanced Settings] in the
[Detailed Settings] dialog box.
- For PCL Printer Driver: See Help of the PCL printer driver.
[Resolution], [Gradation], or [Color Tone].
In order to specify the setting for [Halftones], display the following dialog box.
- For UFR II Printer Driver: Display the [Detailed Settings] dialog box by clicking
[Details] in the [Quality] sheet.
- For PCL Printer Driver: See Help of the PCL printer driver.
Adjustment].
In order to specify the setting for [Matching Mode], display the following sheet.
- For UFR II Printer Driver: Display the [Matching] sheet by selecting the
[Manual Color Settings] check box in the [Quality] sheet, and then clicking
[Color Settings].
- For PCL Printer Driver: See Help of the PCL printer driver.
Default], and then specify the same setting for TEXT, GRAPHICS, and IMAGE
in MATCHING METHOD (See p. 5-86).
In order to specify the setting for [Matching Mode], display the following sheet.
- For UFR II Printer Driver: Display the [Matching] sheet by selecting the
[Manual Color Settings] check box in the [Quality] sheet, and then clicking
[Color Settings].
- For PCL Printer Driver: See Help of the PCL printer driver.