Adjusting The Color Balance - Canon Laser Shot LBP5970 User Manual

Adjusting the Color Balance

When all the printout results appear reddish or bluish, or the color balance is not
appropriate, you can correct the colors by adjusting each toner density of C (Cyan),
M (Magenta), Y (Yellow), K (Black). The toner density can be specified in the range
of 1 to 16 and is set to the standard density (9) before shipment.
When adjusting the toner density using the control panel, use the following
procedure.
IMPORTANT
While adjusting the toner density little by little, print the defective print data from the
computer and check the printout results. If you cannot adjust the toner density, reset the
density to the default value (9), and then contact your local authorized Canon dealer.
Settings 1
Press [Settings].
SETUP
CONTROL MENU
2
Utility
Select QUALITY MENU using [
Settings
QUALITY MENU
RESOLUTION
OK
The options for QUALITY MENU are displayed.
3
Utility
Select DENSITY of the target color using [
press [OK].
Settings
DENSITY:BLACK
OK
=9
The toner density setting is displayed.
→
] and [ ], then press [OK].
→
→
→
→

Adjusting the Color Balance

] and [ ], then
7-95
7