IMPORTANT
Adjustment of the toner density affects all the color print jobs. Normally, use the printer
with the toner density left to the default value (9).
Cause 2
Any of the four color toner cartridges is running out, or the drum cartridge
has been deteriorated.
Remedy 1 Replace the toner cartridge of the color for which <PREP. "color" TNR> or
<CHG."color" TNR> is indicated with a new one. (See "Replacing Toner
Cartridges," on p. 6-2)
Remedy 2 See "When Any Print Defect Appears" (p. 7-69) and solve the problem.
Data is not printed in correct colors or colored text appears to be blurred due to a
phenomenon of "Out-of-Register Colors".
Cause 1
The drum cartridges are not installed properly.
Remedy
Check if the drum cartridges are installed properly. (See "Replacing Drum
Cartridges," on p. 6-15)
Cause 2
Any of the four color toner cartridges is running out, or the drum cartridge
has been deteriorated.
Remedy 1 Replace the toner cartridge of the color for which <PREP. "color" TNR> or
<CHG."color" TNR> is indicated with a new one. (See "Replacing Toner
Cartridges," on p. 6-2)
Remedy 2 See "When Any Print Defect Appears" (p. 7-69) and solve the problem.
Cause 3
Appropriate paper is not being used.
Remedy
Replace the paper with one that can be used and print again. (See "Paper
Requirements," on p. 3-2)
The colors of thin lines or filled-in patterns are different from the specified colors, or
do not appear at all.
Cause 1
Some colors cannot be reproduced due to the combination of colors or
patterns.
Remedy 1 Adjust the colors in the application and print again.
Remedy 2 Change the patterns in the application and print again.
Cause 2
The color may appear different depending on the fill-pattern.
Remedy 1 Readjust to a darker color and print again.
Remedy 2 Reload paper to change the feeding direction, then print again.
When You Cannot Obtain Appropriate Printout Results
7
7-61