Turning the Printer ON/OFF
The printer can be turned ON/OFF using the power switch on the right side of the
printer body. Be sure to observe the following instructions in order to prevent
unexpected problems.
2
Turning the Printer ON
To use this printer, press " " of the power switch to turn the printer ON. After
running a self-diagnostic test on the printer unit and optional accessories, the
printer will be ready to print.
IMPORTANT
Do not turn the power ON immediately after turning it OFF. If you want to turn the printer
•
ON again after turning it OFF, wait at least 10 seconds after turning the printer OFF
before turning it ON again.
If the printer does not operate properly or an error message appears, see "Message List"
•
(p. 7-23) and "Service Call Display" (p. 7-45).
Be sure to set the paper cassette in the printer before you turn the power ON for the first
•
time after you install the printer.
NOTE
When you turn the power ON for the first time after you install a hard disk or when a
problem has occurred to the hard disk, the printer is ready to print after approximately 60
seconds after it is turned ON because the hard disk is formatted after the printer is turned
ON.
2-2
Turning the Printer ON/OFF