You can overprint CMYK data in the composite output.
All colors used for data are overlaid and printed on one plate so you can check the
ﬁnishing result without separating the colors.
This item is only available for data having the overprint attribute set.
This item does not apply overprinting to spot colors.
If a setting value other than NONE is selected for CMYK PROFILE (See p. 5-85),
overprinting is not applied even when ON is speciﬁed.
If ON is speciﬁed for this item, overall color hues may be changed, compared to
when OFF is speciﬁed. In this case, set RENDER CL SPACE (See p. 5-84) to
CMYK to match the color hues.
85 to 115 %; 100 %*
Adjusts the brightness of the whole image (in 5 % increments). The smaller the
speciﬁed value is, the brighter the color is, and the larger, the darker it is.
If TONER SAVE (See p. 5-44) in the common SETUP menu is set to ON, this item
cannot be used.
SETUP Menu Settings