Before loading coated paper or labels, fan them in small
batches and align the edges.
Thoroughly fan in small batches
When loading paper, take care not to cut your hands with the edges of the
Be sure to fan the coated paper or labels thoroughly before loading them. If they
are not fanned enough, multiple sheets of paper may be fed at once, causing paper
When fanning or aligning coated paper, try to hold the edges to avoid touching the
Take care not to mark or stain the printing surface of the coated paper with
ﬁngerprints, dust, or oil. This may result in poor print quality.
Gently load the stack of paper with the printing side facing
down until it touches the back of the tray.
Tap the edges on a flat
surface a few times
Loading Paper in the Multi-purpose Tray