Canon Laser Shot LBP5970 User Manual page 428

Laser beam
Hide thumbs Also See for Laser Shot LBP5970:
Table of Contents

Advertisement

<55 HDD ERROR>
Cause
An error has occurred in the hard disk.
Remedy 1 The printer reformats the hard disk automatically.
Remedy 2 The printer starts up with its settings not using the hard disk by pressing
[Online]. However, you cannot print with the functions that require the hard disk.
Remedy 3 Contact your local authorized Canon dealer for servicing.
<56 HDD ERROR>
Cause
An error has occurred in the hard disk.
Remedy
Format the hard disk in HDD MAINTENANCE (See p. 5-73) in the USER MAIN.
options in the SETUP menu. If the same error occurs, you need to replace the
hard disk. Contact your local authorized Canon dealer for servicing.
<57 RIP ONCE ERR.>
Cause 1
The printer cannot continue to print multiple copies using RIP Once
because the hard disk has run out of free space.
Remedy 1 Divide the job into multiple jobs, then print again.
Remedy 2 Set RIP ONCE (See p. 5-27) in the CONTROL MENU options in the SETUP
menu to OFF, and then perform a hard reset. (The functions of RIP Once
become disabled.)
Remedy 3 A copy of the data is printed by pressing [Online].
Cause 2
The number of the copies that the printer can process exceeded when
printing in the [Edit and Preview] mode.
Remedy 1 Print all the print jobs again using the printer driver for this printer.
Remedy 2 Reduce the number of the pages you print at a time and print again with the job
divided into multiple jobs.
<58 JOB MEM.FULL>
Cause
There is not sufficient free RAM space to process jobs.
Remedy 1 If you are processing multiple jobs at once, press [Online] to cancel printing,
wait for other jobs complete, and then print again.
Remedy 2 If the job data is too large, divide the job and print again.
<Auto Error Skip>
<Auto Error Skip>
<Auto Error Skip>
Message List
7-33
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents