Interface Menu Options; Quality Change; I/F Connection - Canon Laser Shot LBP5970 User Manual

QUALITY CHANGE

CONT.PRINTING*, STOP PRINTING
Specifies whether the printer should continue printing with the resolution of the
data being lowered or stop printing displaying the following error message when it
cannot print with the specified value of resolution.
Error Message
<38 LOW IMGE QLTY>
If CONT.PRINTING is specified, the printer prints with the resolution of the data
being lowered automatically without displaying a message.
If STOP PRINTING is specified, the printer stops printing, displaying a message.
In this case, the printer resumes printing with the resolution of the data being
lowered by pressing [Online].
NOTE
When the message <38 LOW IMGE QLTY> appears frequently by specifying
STOP PRINTING for this item, perform the following procedure.
1. If GRADATION LEVEL is set to HIGH 2, set it to HIGH 1. If you do so,
however, the printer prints with the gradation level of the data being lowered.
2. When the message still appears after applying the Remedy 1, or when you
want to print with the gradation level of the data as it is, install an optional
expansion memory module (RAM).

INTERFACE MENU Options

I/F CONNECTION

USB ......................................ON*, OFF
NETWORK ...........................ON*, OFF
Specifies the settings for the interfaces used for communication with the
computer, etc.
You can specify ON or OFF for each interface.
Even if multiple interfaces are set to ON, the printer automatically switches to the
one that received the data first. Therefore, you do not need to change the setting
in the printer each time you connect the printer to different types of interfaces at
the same time.
Setting
When the printer receives a large amount of data or
complicated data, the memory required for the
process may run out, and the printer may print with its
resolution level being lowered automatically. Specify
whether the printer should display an error message
when the printer is in this status.
SETUP Menu Settings
5
5-55