Canon LASER SHOT LBP6000 Quick Setup Manual

Quick Setup Guide
SPA Guía de instalación rápida KOR
คู ่ ม ื อ การติ ด ตั ้ ง ด่ ว น
THA VIE Hướng dẫn Cài đặt Nhanh
Read this guide first.
Please read this guide before operating this product.
After you finish reading this guide, store it in a safe place for future reference.
Lea esta guía primero.
SPA
Por favor, lea esta guía antes de usar este producto.
Después de leer esta guía, guárdela en un lugar seguro
para posteriores consultas.
POR Leia este manual primeiro.
Leia este manual antes de utilizar o produto.
Após ter lido o manual, guarde-o em um local seguro para
consultas futuras.
Đọc sổ tay hướng dẫn này trước tiên.
VIE
Hãy đọc sổ tay hướng dẫn này trước khi vận hành sản
phẩm này.
Sau khi bạn đọc xong sổ tay hướng dẫn này, hãy cất nó ở
một nơi an toàn để tham khảo về sau.
Before installing the printer, read the cautions carefully which are described on the right side.
SPA
Antes de instalar la impresora, lea atentamente las precauciones
que se describen en el lado derecho.
POR Antes de instalar a impressora, leia cuidadosamente as
informações sobre cuidados que estão descritas do lado direito.
VIE
Trước khi cài đặt máy in, hãy đọc cẩn thận những thận trọng
được mô tả ở bên phải.
English
ADVERTENCIA
To avoid the risk of personal injury or damage to Para evitar el riesgo de sufrir lesiones
the printer, and for legal information, make sure personales o de causar daños a la impresora
to read the "Legal Notices" and "Important (y para información legal), asegúrese de leer
Safety Instructions" in the e-Manual included on atentamente los "Avisos legales" y las
the accompanying CD-ROM carefully before "Instrucciones de seguridad importantes" del
using the printer. e-Manual incluido en el CD-ROM suministrado
antes de utilizar la impresora.
Português do Brasil
คำเตื อ น
ATENÇÃO
เพื ่ อ ป้ อ งกั น ความเสี ่ ย งต่ อ การบาดเจ็ บ ทางร่ า งกายหรื อ
Para evitar o risco de ferimentos ou danos à
ความเสี ย หาย ต่ อ เครื ่ อ งพิ ม พ์ ต ลอดจนดู ข ้ อ มู ล ทางด้ า น
impressora e para obter informações legais, leia
กฎหมาย ขอให้ อ ่ า น "ข้ อ ความทางกฎหมาย"
com cuidado as "Notificações legais" e
และ "คำแนะนำด้ า นความปลอดภั ย ที ่ ส ำคั ญ " ในคู ่ ม ื อ
"Instruções de segurança importantes" no
แบบอิ เ ล็ ก ที ่ ร วมอยู ่ ใ นแผ่ น CD-ROM ที ่ ใ ห้ ม านี ้ อ ย่ า ง
manual eletrônico incluído no CD-ROM
ระมั ด ระวั ง ก่ อ นใช้ เ ครื ่ อ งพิ ม พ์
fornecido, antes de usar a impressora.
RT5-0592 (000) XXXXXXXXXX
POR Guia de Instalação Rápida
KOR
อ่ า นคู ่ ม ื อ ฉบั บ นี ้ ก ่ อ น
THA
โปรดอ่ า นคู ่ ม ื อ ฉบั บ นี ้ ก ่ อ นใช้ ผ ลิ ต ภั ณ ฑ์ ห ลั ง จาก
ที ่ อ ่ า นคู ่ ม ื อ จบแล้ ว ให้ เ ก็ บ ไว้ ใ นที ่ ป ลอดภั ย
เพื ่ อ การอ้ า งอิ ง ในภายหน้ า
KOR
ก่ อ นการติ ด ตั ้ ง เครื ่ อ งพิ ม พ์ โปรดอ่ า นข้ อ ควรระวั ง ให้ ร อบคอบ
THA
ซึ ่ ง ได้ อ ธิ บ ายไว้ ท างขวามื อ
Español
ภาษาไทย
Tiếng Việt
CẢNH BÁO
Để tránh rủi ro về thương tích cá nhân hoặc hư
hỏng máy in, và để biết thông tin pháp lý, đảm
bảo đọc "Các Lưu Ý Về Luật Pháp" và "Các Chỉ
dẫn An toàn Quan trọng" trong Hướng dẫn sử
dụng điện tử có trong CD-ROM đi kèm một cách
cẩn thận trước khi sử dụng máy in.
© CANON INC. 2010
This manual describes only warnings and cautions for the installation and the power
supply. Be sure to read "Important Safety Instructions" described in the e-Manual
(HTML manual) included in the supplied CD-ROM also.
Installation
- Do not install the printer in a location near alcohol, paint thinner, or other
flammable substances. If flammable substances come into contact with
electrical parts inside the printer, this may result in a fire or electrical
shock.
- Do not place the following items on the printer.
- Necklaces and other metal objects
- Cups, vases, flowerpots, and other containers filled with water or
liquids
If these items come into contact with a high-voltage area inside the
printer, this may result in a fire or electrical shock.
If these items are dropped or spilled inside the printer, immediately turn
OFF the power switch (1) and disconnect the interface cables if they are
connected (2). Then, unplug the power plug from the AC power outlet (3)
and contact your local authorized Canon dealer.
(1)
(1)
- Do not install the printer in unstable locations, such as on unsteady
platforms or inclined floors, or in locations subject to excessive
vibrations, as this may cause the printer to fall or tip over, resulting in
personal injury.
- The ventilation slots are provided for proper ventilation of working parts
inside the printer. Never place the printer on a soft surface, such as a
bed, sofa, or rug. Blocking the slots can cause the printer to overheat,
resulting in a fire.
- Do not install the printer in the following locations, as this may result in a
fire or electrical shock.
- A damp or dusty location
- A location exposed to smoke and steam, such as near a cookery or
humidifier
- A location exposed to rain or snow
- A location near a water faucet or water
- A location exposed to direct sunlight
- A location subject to high temperatures
- A location near open flames
- When installing the printer, gently lower the printer to the installation site
so as not to catch your hands between the printer and the floor or
between the printer and other equipment, as this may result in personal
injury.
- When connecting the interface cable, connect it properly by following the
instructions in the e-Manual. If not connected properly, this may result in
malfunction or electrical shock.
- When moving the printer, follow the instructions in the e-Manual to hold it
correctly. Failure to do so may cause you to drop the printer, resulting in
personal injury.
PRINTED IN VIETNAM
Important Safety Instructions
Indicates a warning concerning operations that may lead to
death or injury to persons if not performed correctly. To use the
machine safely, always pay attention to these warnings.
Indicates a caution concerning operations that may lead to injury
to persons if not performed correctly. To use the machine safely,
always pay attention to these cautions.
- Do not damage or modify the power cord. Also, do not place heavy
objects on the power cord or pull on or excessively bend it, as this can
cause electrical damage, resulting in fire or electrical shock.
- Keep the power cord away from all heat sources. Failure to do so can
cause the power cord insulation to melt, resulting in a fire or electrical
shock.
(2)
- The power cord should not be taut, as this may lead to a loose
connection and cause overheating, which could result in a fire.
(3)
- The power cord may become damaged if it is stepped on, fixed with
staples, or if heavy objects are placed on it. Continued use of a
damaged power cord can lead to an accident, such as a fire or electrical
shock.
- Do not plug or unplug the power plug with wet hands, as this can result
in electrical shock.
- Do not plug the power cord into a multi-plug power strip, as this can
result in a fire or electrical shock.
- Do not bundle up or tie up the power cord in a knot, as this can result in
a fire or electrical shock.
- Insert the power plug completely into the AC power outlet. Failure to do
so can result in a fire or electrical shock.
- If excessive stress is applied to the connection part of the power cord, it
may damage the power cord or the wires inside the machine may
disconnect. This could result in a fire. Avoid the following situations:
- Connecting and disconnecting the power cord frequently.
- Tripping over the power cord.
- The power cord is bent near the connection part, and continuous stress
is being applied to the power outlet or the connection part.
- Applying a shock to the power connector.
- Do not use power cords other than the one provided, as this can result in
a fire or electrical shock.
- As a general rule, do not use extension cords. Using an extension cord
may result in a fire or electrical shock.
- Do not use a power supply voltage other than that listed herein, as this
may result in a fire or electrical shock.
- Always grasp the power plug when unplugging the power plug. Do not
pull on the power cord, as this may expose the core wire of the power
cord or damage the cord insulation, causing electricity to leak, resulting
in a fire or electrical shock.
- Leave sufficient space around the power plug so that it can be
unplugged easily. If objects are placed around the power plug, you may
be unable to unplug it in an emergency.
User Software
Symbols
Power Supply