Quality Menu Options - Canon Laser Shot LBP5970 User Manual

Specify OFF for this item when you want to match the setting of the orientation or
printing side for the last page with those for its previous page, such as when you
want to print previously printed paper etc. whose printing orientation or printing
side is fixed.
NOTE
The setting is effective only when 2-SIDED PRINT. is set to ON.

QUALITY MENU Options

RESOLUTION
FINE*, SUPER FINE
Specifies the resolution for when processing print data.
Resolution is indicated in "dpi" that indicates the number of dots per inch, and the
larger the value is, the higher precision you can print at.
If FINE is specified, the printer prints in the Fine mode at 600dpi. This mode is
appropriate for printing general text or charts at a high speed.
If SUPER FINE is specified, the printer prints in the Super Fine mode at 1200dpi.
This mode reproduces text and outlines of diagrams clearly with a fine resolution.
This mode is appropriate especially for printing data that contain many small
letters.
IMPORTANT
If TEXT, GRAPHICS, or IMAGE in the following items is set to ERR DIFFUSION,
and this item is set to SUPER FINE, ERR DIFFUSION changes to HIGH RESOL..
- B & W HALFTONES and COLOR HALFTONES in HALFTONES in the QUALITY
MENU options in the SETUP menu
- B & W HALFTONES and COLOR HALFTONES in the PDF1.5 menu
- B & W HALFTONES and COLOR HALFTONES in the PS menu
● About memory amount required for using the Super Fine mode
Printing in the Super Fine mode requires a large amount of memory for data
process. Therefore, depending on the amount or type of data, the message
<39 SPL MEM.FULL> may appear, disabling printing. In this case, print with
RESOLUTION set to FINE and GRADATION LEVEL to HIGH 1, or install an
optional expansion RAM module as needed. For details on the optional
expansion RAM modules, see Getting Started Guide.
SETUP Menu Settings
5
5-43