Canon Laser Shot LBP5970 User Manual page 249

5
■ GAMMA
5-52 SETUP Menu Settings
NOTE
The settings in the control panel and those in the printer driver correspond to each
•
other as follows.
Printer Driver Setting
Perceptual [Monitor Color
Matched]
Perceptual [Photographic]
Saturation
Colorimetric
Colorimetric [No
White-Point Correction]*
1
* [Colorimetric [No White-Point Correction]] can be specified only on Windows 2000/XP/Server 2003/
Vista.
Set CMS/GAMMA (See p. 5-49) to CMS to enable this item.
•
TEXT .................................... 1.4*, 1.8, 2.2, 1.0
GRAPHICS .......................... 1.4*, 1.8, 2.2, 1.0
IMAGE.................................. 1.4*, 1.8, 2.2, 1.0
Adjusts the brightness of the printout results without spoiling the lightest parts and
darkest parts of the data. Apply this option when printed colors in the printed
paper are lighter than those in the original image (such as photographs that have
not yet been scanned or graphics created on the monitor) or when you want to
change the brightness of colors. The greater the setting value is, the darker in
color the data is printed. 1.4 is the value without correction.
You can specify the settings by data type of TEXT, GRAPHICS, and IMAGE.
NOTE
Set CMS/GAMMA (See p. 5-49) to CMS to enable this item.
Control Panel Setting
Specify PERCEPTUAL for this item,
and set OUTPUT PROFILE to Normal.
Specify PERCEPTUAL for this item,
and set OUTPUT PROFILE to Photo.
Specify SATURATION for this item.
Specify COLORIMETRIC for this item.
Cannot be specified from the control panel.
1