Auto Scan Setup; Activate Auto Scan; Flip - Optiview VR4HT User Manual

4.9.7 Auto Scan Setup

In Figure 4-38, click border button. The interface is shown as in
X 3 4 7 H 3 4 7 H 347H
Please go to Figure 4-35, use direction arrows to select camera left limit
X349H349 H349H X 3 4 9 H 3 49H 349H
Then please go to Figure 4-43
X350H35 0H35 0H
Repeat the above procedures to set right limit.

4.9.8 Activate Auto Scan

In Figure 4-40, click ―Auto Scan‖ button, the system begins auto scan. Correspondingly, the auto
scan button becomes Stop button. Click stop button to terminate scan operation.

4.10 Flip

In Figure 4-40, click page switch button, you can see an interface is shown as below. See Figure
4-45. Here you can set auxiliary function. The aux value has relation ship with the Aux button of
the decoder.
Click page switch button again, system goes back to Figure 4-36.
and click left limit button
X
Figure 4-44
Figure 4-45
Figure 4-43.
X348H348 H348H
78