Preset Setup; Activate Preset; Patrol Setup; Activate Patrol - Optiview VR4HT User Manual

6.2.1 Preset Setup

Note: The following setups are usually operated in the
6-6 .
X
In Figure 6-2 , use eight direction arrows to adjust camera to the proper position.
X 4 0 8 H 4 0 8 H 408 H X
In Figure 6-5 , click preset button and input preset number. The interface is shown as in
X 4 0 9 H 4 0 9 H 409 H X
6-7 .
X
Add this preset to one patrol number

6.2.2 Activate Preset

In Figure 6-6 please input preset number in the No. blank, and click preset button.
X 4 1 1 H 4 1 1 H 411 H X

6.2.3 Patrol Setup

In Figure 6-5 , click patrol button. The interface is shown as in
X 4 1 2 H 4 1 2 H 412 H X
Input preset number and then add this preset to one patrol.

6.2.4 Activate Patrol

In Figure 6-6 , input patrol number in the No. blank and click patrol button
X 4 1 4 H 4 1 4 H 414 H X

6.2.5 Pattern Setup

In Figure 6-5 , click pattern button and then click begin button. The interface shows like
X 4 1 5 H 4 1 5 H 415 H X
6-9 .
X
Figure 6-6
Figure 6-2
X405H40 5H405 H
Figure 6-7
Figure 6-8
X413H41 3H41 3H
Figure 6-8
, Figure 6-5 and Figure
X X406H406 H406 H X X407H407 H407 H
X410H410H 410H
.
X
X416H41 6H41 6H
Figure
Figure
113