Optiview VR4HT User Manual page 108

In Figure 5-33, you can see the 6th and 7th position hard disks both belong to HDD Group 2.
Important
Once you change the HDD Group settings, system will pack the records and snapshots, and
then reboot.
Channels Setting
Click the button named with ―Channels Settings‖ at the top right corner of the Figure 5-30,
system will pop up an interface shown as in Figure 5-34.
When you are setting the configurations of the channels setting, please select relevant channels
first (such as channel 1 to 16), and then select the HDD Group NO. Please click the Save button
to save current setup.
Figure 5-32
Figure 5-33
98