U & 2U - Optiview VR4HT User Manual

USB port
Network
abnormal
Net
indication
light
HDD
abnormal
HDD
indication
light
IR Receiver IR
Alarm
indication Alarm
light
2.1.2 1.5U & 2U
The front pane of 1.5U series product is shown as in Figure 2-4.
Please refer to the following sheet for front panel button information.
Name
Power button
Shift Shift
Up/1
Down/4
Left/2
⊳
Right/3
In text mode, click it to switch between numeral, English
character(small/capitalized) and etc.
Realize other special functions.
To connect USB storage device, USB mouse.
Network error occurs or there is no network connection, the
light becomes red to alert you.
HDD error occurs or HDD capacity is below specified
threshold value, the light becomes red to alert you.
It is to receive the signal from the remote control.
Here you can view there is external alarm input or not. The
light becomes on when there is an external alarm. The light
become off when the external alarm stops.
Icon Function
Power button, press this button for three seconds to boot up
or shut down DVR.
In textbox, click this button to switch between numeral,
English(Small/Capitalized),donation and etc.
Activate current control, modify setup, and then move up
and down.
、
Increase/decrease numeral.
Assistant function such as PTZ menu.
In text mode, input number 1/4 (English character G/H/I)
Shift current activated control,
Figure 2-4
24